Basic Vinyl Car Wrap Information
The installation of vinyl car wrapping requires some skill and knowledge. Usually, there will be more than one person who will be needed to take care of the job. Getting the design that you want placed on your car with the use of a vinyl car wrap involves getting your car ready for this car wrap first and then using the right tools to effectively put the wrap on the exterior of your car. You can be sure to get the best results of your vinyl car wrap if you let a professional car detailing company do it for you.
However, if you have a passion for car detailing and cars as a whole, it would be a good endeavor to engage in the designing and installation of these vinyl car wraps. You just need to be trained in order for you to apply your vinyl car wrap properly.
Quality vinyl car wraps are a must regardless of who will be doing the installing if it will be you or a car detailing company alone. Getting the design right for your car wraps can be made possible if you first know what model and make of car you are dealing with. You must make sure to consider this factor so that whatever design elements you have in store, they will just fit your vehicle just right. Most of the time, the natural lines of your car are the basis for these designs of car wraps. Door panels will be great for the covering of overlaps.
To prepare your vehicle for these vinyl car wraps, they must first be thoroughly cleaned with some water and soap. You then proceed in thoroughly drying your car in the next 24 hours. Degreasing is the next process after this drying. When it comes to this, it is up to the professional or yourself if a panel wipe that is fast drying is employed or some isopropyl alcohol.
The use of solvent printed media is also accepted as long as there will be at least 48 hours that must be spent on its outgassing. Rolls should be kept standing on a vertical position. The process of degassing is very much important to allow the graphic design to be fitted perfectly to the model and shape of your car as well as able to stick on them properly with the use of the right adhesive.
Cold rollers are often used during the lamination process. Tension must not be applied in extreme pressure into these rollers. When the process will involve the application of a velvet strip, the use of a reliable hard squeegee is a must. So that your car will not bear a lot of scratches, the velvet should be changed regularly. Based on car detailing experts, the flat parts of the panels of the vinyl car wrap must first be applied following with their respective sides.